English
90 high-speed extruder Umfanekiso obonakalayo
  • I-90 ye-extruder enesantya esiphezulu

I-90 ye-extruder enesantya esiphezulu

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Usetyenziso lweZixhobo

Esi sixhobo senzelwe i-extrusion ye-high-speed yeeplastiki ezifana ne-PVC, i-TPU, kunye ne-TPE. Isetyenziselwa ubukhulu becala ukukhutshwa kweentambo zombane, iintambo zokwakha ze-BV kunye ne-BVV, iintambo ezinemibala emibini yokutofa, iintambo zekhompyutha, ii-sheaths ze-insulation line, iileyile zeentambo zentsimbi, kunye neentambo zemoto ezinemibala emibini.

Iinkcukacha eziphambili

I-1.Iintlobo zeNxibelelwano zoMveliso: Isetyenziselwa iintambo zombane, i-BV kunye ne-BVV imigca yokwakha, i-injection yokubumba imigca emibini yemibala, imigca yekhompyutha, i-insulation line sheath extrusion, i-coating yentambo yensimbi, kunye ne-automotive-colored line extrusion.

I-2.I-Extrusion Material: Ifanelekile kwi-high-speed extrusion yeeplastiki ezifana ne-PVC, i-TPU, kunye ne-TPE, kunye ne-100% ye-plasticization degree.

3.I-Diameter ye-Conductor: Ф2.0 ukuya ku-Ф15.0mm. (Izinto zokubumba ezihambelanayo kufuneka zixhotyiswe ngokobukhulu bedayamitha yocingo.)

4.I-Diameter yocingo olufanelekileyo: Ф3.0mm ukuya ku-Ф20.0mm.

I-5.Isantya esiphezulu somgca: 0 - 300m / min (isantya somgca sixhomekeke kumgca womgca).

6.Ubude beZiko: 1000mm.

I-7.Ubonelelo lwamandla: 380V + 10% 50HZ inkqubo ye-five-phase ye-five-phase.

I-8.I-Operation Direction: Umamkeli (ukusuka-ukuya ekusebenzeni).

9.Umbala woMtshini: Imbonakalo iyonke: I-apula eluhlaza; Blowu oqaqambileyo

Amacandelo Angundoqo

I-1.800-uhlobo olusebenzayo lwe-tension umatshini wokukhulula: isethi e-1.

Itheyibhile ye-2.I-Straightening: I-1 isethi.

I-3.I-Heating-type powder feeder: isethi e-1.

4.90 # Inginginya ngoomisa kunye nomatshini wokufunxa: 1 iseti.

I-5.PLC inkqubo yokulawula esekelwe kwikhompyutheni: isethi ye-1.

I-6.I-sink ehambayo kunye ne-sink esisigxina: isethi ye-1.

7.Laser caliper: 1 iseti.

I-8.Umatshini wokushicilela okhawulezayo: Isethi ye-1.

I-9.9 yemitha yokugcina intambo yokugcina intambo: isethi e-1.

10.Kuvaliwe umatshini wokutsalwa kwamavili amabini: Iseti ye-1.

I-11.Ikhawunta yemitha ye-elektroniki: Isethi e-1.

I-12.Umatshini wokuvavanya i-spark frequency: 1 iseti.

I-13.800 PLC-elawulwa ngumatshini wokuthatha i-axis ezimbini: isethi ye-1.

I-14.Iinxalenye ze-Random kunye nokusebenza kunye nokugcinwa kwencwadana: isethi ye-1.

I-15.Gqibezela umzobo womatshini: Isethi ye-1.

Wamkelekile kwisampulu yocingo lwemeyile. Imigca yemveliso elungiselelweyo inokwenziwa ngokusekwe kwisampulu yocingo, isikali sesityalo kunye neemfuno zomthamo wemveliso.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    iimveliso ezinxulumene

    Cofa u-enter ukukhangela okanye i-ESC ukuvala