English
70+35 high-speed extruder Umfanekiso ofakiweyo
  • I-70 + 35 i-extruder enesantya esiphezulu

I-70 + 35 i-extruder enesantya esiphezulu

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Usetyenziso lweZixhobo

Esi sixhobo yenzelwe extrusion high-speed iiplastiki kuquka PVC, PP, PE, kunye SR-PVC. Isetyenziswa ngokuyintloko kwi-extrusion ye-BV kunye ne-BVV yokwakha imigca, intambo ye-injection yemibala emibini, iintambo zombane, iintambo zekhompyutha, ii-sheaths ze-insulation line, i-coatings yentambo yensimbi, kunye nemigca ye-automotive yemibala emibini, phakathi kwabanye.

Iinkcukacha eziphambili

  1. I-1.Iintlobo zeNxibelelwano zoMveliso: Isetyenziselwa ukukhutshwa kwe-BV, imigca yokwakha ye-BVV, iintambo ze-injection ezinemibala emibini, iintambo zombane, iintambo zekhompyutha, ii-sheaths ze-insulated wire, i-coating ye-wire coating, kunye ne-automotive-color lines.
  2. I-2.I-Extrusion Material: Ifanelekile kwi-high-speed extrusion yeeplastiki ezifana ne-PVC, i-PP, i-PE, kunye ne-SR-PVC, kunye ne-100% ye-plasticization degree.
  3. 3.I-Diameter ye-Conductor: Uluhlu ukusuka ku-Ф1.0 ukuya kwi-Ф10.0mm. (Izinto zokubumba ezihambelanayo kufuneka zixhotyiswe ngokobukhulu bedayamitha yocingo.)
  4. 4.I-Diameter yocingo olufanelekileyo: Ukususela ku-Ф2.0mm ukuya kwi-Ф15.0mm.
  5. I-5.Isantya esiphezulu somgca: 0 - 500m / min (isantya somgca sixhomekeke kumgca womgca).
  6. 6.Ubude beZiko: 1000mm.
  7. I-7.Ubonelelo lwamandla: 380V + 10% 50HZ inkqubo ye-five-phase ye-five-phase.
  8. I-8.I-Operation Direction: Umamkeli (ukusuka-ukuya ekusebenzeni).
  9. 9.Umbala woMtshini: I-apile eluhlaza; Blowu oqaqambileyo.

Amacandelo Angundoqo

  1. I-1.800-630P i-magnetic powder tension cable rack: 1 iseti.
  2. I-2.Ifreyimu yoxinzelelo oluthe nkqo: Isethi e-1.
  3. 3.Itheyibhile yokulungelelanisa: Isethi ye-1.
  4. 4.70 # Inginginya kunye nomatshini wokumisa kunye nokufunxa: 1 iseti.
  5. 5.35# Umatshini wokubumba umatshini wokubumba omileyo: 1 iseti.
  6. I-6.PLC inkqubo yokulawula ingqiqo: Isethi ye-1.
  7. I-7.I-sink esebenzayo kunye ne-double-layer fixed sink: isethi ye-1.
  8. 8.Laser isixhobo sokulinganisa ububanzi: 1 iseti.
  9. I-9.I-rack yokugcina i-Tension: Isethi ye-1.
  10. 10.Kuvaliwe umatshini wokutsalwa kwamavili amabini: Iseti ye-1.
  11. I-11.Ikhawunta yemitha ye-elektroniki: Isethi e-1.
  12. I-12.Umatshini wokuvavanya i-Spark: isethi ye-1.
  13. 13.630-800P umatshini wokuthatha i-axis ezimbini: Isethi e-1.
  14. I-14.Iinxalenye ze-Random kunye nokusebenza kunye nokugcinwa kwencwadana: isethi ye-1.
  15. I-15Gqibezela umzobo womatshini: Iseti e-1.

Wamkelekile kwisampulu yocingo lwemeyile. Imigca yemveliso elungiselelweyo inokwenziwa ngokusekwe kwisampulu yocingo, isikali sesityalo kunye neemfuno zomthamo wemveliso.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    iimveliso ezinxulumene

    Cofa u-enter ukukhangela okanye i-ESC ukuvala